Controller 層代碼就該這麼寫,簡潔又優雅!
大家好,我是不才陳某~
一個優秀的 Controller 層邏輯
說到 Controller,相信大家都不陌生,它可以很方便地對外提供數據接口。它的定位,我認爲是「不可或缺的配角」,說它不可或缺是因爲無論是傳統的三層架構還是現在的 COLA 架構,Controller 層依舊有一席之地,說明他的必要性;說它是配角是因爲 Controller 層的代碼一般是不負責具體的邏輯業務邏輯實現,但是它負責接收和響應請求
從現狀看問題
Controller 主要的工作有以下幾項
-
接收請求並解析參數
-
調用 Service 執行具體的業務代碼(可能包含參數校驗)
-
捕獲業務邏輯異常做出反饋
-
業務邏輯執行成功做出響應
//DTO
@Data
public class TestDTO {
private Integer num;
private String type;
}
//Service
@Service
public class TestService {
public Double service(TestDTO testDTO) throws Exception {
if (testDTO.getNum() <= 0) {
throw new Exception("輸入的數字需要大於0");
}
if (testDTO.getType().equals("square")) {
return Math.pow(testDTO.getNum(), 2);
}
if (testDTO.getType().equals("factorial")) {
double result = 1;
int num = testDTO.getNum();
while (num > 1) {
result = result * num;
num -= 1;
}
return result;
}
throw new Exception("未識別的算法");
}
}
//Controller
@RestController
public class TestController {
private TestService testService;
@PostMapping("/test")
public Double test(@RequestBody TestDTO testDTO) {
try {
Double result = this.testService.service(testDTO);
return result;
} catch (Exception e) {
throw new RuntimeException(e);
}
}
@Autowired
public DTOid setTestService(TestService testService) {
this.testService = testService;
}
}
如果真的按照上面所列的工作項來開發 Controller 代碼會有幾個問題
-
參數校驗過多地耦合了業務代碼,違背單一職責原則
-
可能在多個業務中都拋出同一個異常,導致代碼重複
-
各種異常反饋和成功響應格式不統一,接口對接不友好
改造 Controller 層邏輯
統一返回結構
統一返回值類型無論項目前後端是否分離都是非常必要的,方便對接接口的開發人員更加清晰地知道這個接口的調用是否成功(不能僅僅簡單地看返回值是否爲 null
就判斷成功與否,因爲有些接口的設計就是如此),使用一個狀態碼、狀態信息就能清楚地瞭解接口調用情況
//定義返回數據結構
public interface IResult {
Integer getCode();
String getMessage();
}
//常用結果的枚舉
public enum ResultEnum implements IResult {
SUCCESS(2001, "接口調用成功"),
VALIDATE_FAILED(2002, "參數校驗失敗"),
COMMON_FAILED(2003, "接口調用失敗"),
FORBIDDEN(2004, "沒有權限訪問資源");
private Integer code;
private String message;
//省略get、set方法和構造方法
}
//統一返回數據結構
@Data
@NoArgsConstructor
@AllArgsConstructor
public class Result<T> {
private Integer code;
private String message;
private T data;
public static <T> Result<T> success(T data) {
return new Result<>(ResultEnum.SUCCESS.getCode(), ResultEnum.SUCCESS.getMessage(), data);
}
public static <T> Result<T> success(String message, T data) {
return new Result<>(ResultEnum.SUCCESS.getCode(), message, data);
}
public static Result<?> failed() {
return new Result<>(ResultEnum.COMMON_FAILED.getCode(), ResultEnum.COMMON_FAILED.getMessage(), null);
}
public static Result<?> failed(String message) {
return new Result<>(ResultEnum.COMMON_FAILED.getCode(), message, null);
}
public static Result<?> failed(IResult errorResult) {
return new Result<>(errorResult.getCode(), errorResult.getMessage(), null);
}
public static <T> Result<T> instance(Integer code, String message, T data) {
Result<T> result = new Result<>();
result.setCode(code);
result.setMessage(message);
result.setData(data);
return result;
}
}
統一返回結構後,在 Controller 中就可以使用了,但是每一個 Controller 都寫這麼一段最終封裝的邏輯,這些都是很重複的工作,所以還要繼續想辦法進一步處理統一返回結構
統一包裝處理
Spring 中提供了一個類 ResponseBodyAdvice
,能幫助我們實現上述需求
ResponseBodyAdvice
是對 Controller 返回的內容在 HttpMessageConverter
進行類型轉換之前攔截,進行相應的處理操作後,再將結果返回給客戶端。那這樣就可以把統一包裝的工作放到這個類裏面。
public interface ResponseBodyAdvice<T> {
boolean supports(MethodParameter returnType, Class<? extends HttpMessageConverter<?>> converterType);
@Nullable
T beforeBodyWrite(@Nullable T body, MethodParameter returnType, MediaType selectedContentType, Class<? extends HttpMessageConverter<?>> selectedConverterType, ServerHttpRequest request, ServerHttpResponse response);
}
-
supports:判斷是否要交給 beforeBodyWrite 方法執行,ture:需要;false:不需要
-
beforeBodyWrite:對 response 進行具體的處理
// 如果引入了swagger或knife4j的文檔生成組件,這裏需要僅掃描自己項目的包,否則文檔無法正常生成
@RestControllerAdvice(basePackages = "com.example.demo")
public class ResponseAdvice implements ResponseBodyAdvice<Object> {
@Override
public boolean supports(MethodParameter returnType, Class<? extends HttpMessageConverter<?>> converterType) {
// 如果不需要進行封裝的,可以添加一些校驗手段,比如添加標記排除的註解
return true;
}
@Override
public Object beforeBodyWrite(Object body, MethodParameter returnType, MediaType selectedContentType, Class<? extends HttpMessageConverter<?>> selectedConverterType, ServerHttpRequest request, ServerHttpResponse response) {
// 提供一定的靈活度,如果body已經被包裝了,就不進行包裝
if (body instanceof Result) {
return body;
}
return Result.success(body);
}
}
經過這樣改造,既能實現對 Controller 返回的數據進行統一包裝,又不需要對原有代碼進行大量的改動
處理 cannot be cast to java.lang.String 問題
如果直接使用 ResponseBodyAdvice
,對於一般的類型都沒有問題,當處理字符串類型時,會拋出 xxx.包裝類 cannot be cast to java.lang.String
的類型轉換的異常
在 ResponseBodyAdvice
實現類中 debug 發現,只有 String 類型的 selectedConverterType
參數值是 org.springframework.http.converter.StringHttpMessageConverter
,而其他數據類型的值是 org.springframework.http.converter.json.MappingJackson2HttpMessageConverter
- String 類型
- 其他類型 (如 Integer 類型)
現在問題已經較爲清晰了,因爲我們需要返回一個 Result
對象
所以使用 MappingJackson2HttpMessageConverter
是可以正常轉換的
而使用 StringHttpMessageConverter
字符串轉換器會導致類型轉換失敗
現在處理這個問題有兩種方式
- 在
beforeBodyWrite
方法處進行判斷,如果返回值是 String 類型就對Result
對象手動進行轉換成 JSON 字符串,另外方便前端使用,最好在@RequestMapping
中指定 ContentType
@RestControllerAdvice(basePackages = "com.example.demo")
public class ResponseAdvice implements ResponseBodyAdvice<Object> {
...
@Override
public Object beforeBodyWrite(Object body, MethodParameter returnType, MediaType selectedContentType, Class<? extends HttpMessageConverter<?>> selectedConverterType, ServerHttpRequest request, ServerHttpResponse response) {
// 提供一定的靈活度,如果body已經被包裝了,就不進行包裝
if (body instanceof Result) {
return body;
}
// 如果返回值是String類型,那就手動把Result對象轉換成JSON字符串
if (body instanceof String) {
try {
return this.objectMapper.writeValueAsString(Result.success(body));
} catch (JsonProcessingException e) {
throw new RuntimeException(e);
}
}
return Result.success(body);
}
...
}
@GetMapping(value = "/returnString", produces = "application/json; charset=UTF-8")
public String returnString() {
return "success";
}
- 修改
HttpMessageConverter
實例集合中MappingJackson2HttpMessageConverter
的順序。因爲發生上述問題的根源所在是集合中StringHttpMessageConverter
的順序先於MappingJackson2HttpMessageConverter
的,調整順序後即可從根源上解決這個問題
- 網上有不少做法是直接在集合中第一位添加
MappingJackson2HttpMessageConverter
@Configuration
public class WebConfiguration implements WebMvcConfigurer {
@Override
public void configureMessageConverters(List<HttpMessageConverter<?>> converters) {
converters.add(0, new MappingJackson2HttpMessageConverter());
}
}
- 誠然,這種方式可以解決問題,但其實問題的根源不是集合中缺少這一個轉換器,而是轉換器的順序導致的,所以最合理的做法應該是調整
MappingJackson2HttpMessageConverter
在集合中的順序
@Configuration
public class WebMvcConfiguration implements WebMvcConfigurer {
/**
* 交換MappingJackson2HttpMessageConverter與第一位元素
* 讓返回值類型爲String的接口能正常返回包裝結果
*
* @param converters initially an empty list of converters
*/
@Override
public void configureMessageConverters(List<HttpMessageConverter<?>> converters) {
for (int i = 0; i < converters.size(); i++) {
if (converters.get(i) instanceof MappingJackson2HttpMessageConverter) {
MappingJackson2HttpMessageConverter mappingJackson2HttpMessageConverter = (MappingJackson2HttpMessageConverter) converters.get(i);
converters.set(i, converters.get(0));
converters.set(0, mappingJackson2HttpMessageConverter);
break;
}
}
}
}
參數校驗
Java API 的規範 JSR303
定義了校驗的標準 validation-api
,其中一個比較出名的實現是 hibernate validation
,spring validation
是對其的二次封裝,常用於 SpringMVC 的參數自動校驗,參數校驗的代碼就不需要再與業務邏輯代碼進行耦合了。
我們創建了一個高質量的技術交流羣,與優秀的人在一起,自己也會優秀起來,趕緊點擊加羣,享受一起成長的快樂。
@PathVariable 和 @RequestParam 參數校驗
Get 請求的參數接收一般依賴這兩個註解,但是處於 url 有長度限制和代碼的可維護性,超過 5 個參數儘量用實體來傳參
對 @PathVariable 和 @RequestParam 參數進行校驗需要在入參聲明約束的註解
如果校驗失敗,會拋出 MethodArgumentNotValidException
異常
@RestController(value = "prettyTestController")
@RequestMapping("/pretty")
@Validated
public class TestController {
private TestService testService;
@GetMapping("/{num}")
public Integer detail(@PathVariable("num") @Min(1) @Max(20) Integer num) {
return num * num;
}
@GetMapping("/getByEmail")
public TestDTO getByAccount(@RequestParam @NotBlank @Email String email) {
TestDTO testDTO = new TestDTO();
testDTO.setEmail(email);
return testDTO;
}
@Autowired
public void setTestService(TestService prettyTestService) {
this.testService = prettyTestService;
}
}
校驗原理
在 SpringMVC 中,有一個類是 RequestResponseBodyMethodProcessor
,這個類有兩個作用(實際上可以從名字上得到一點啓發)
-
用於解析 @RequestBody 標註的參數
-
處理 @ResponseBody 標註方法的返回值
解析 @RequestBoyd 標註參數的方法是 resolveArgument
public class RequestResponseBodyMethodProcessor extends AbstractMessageConverterMethodProcessor {
/**
* Throws MethodArgumentNotValidException if validation fails.
* @throws HttpMessageNotReadableException if {@link RequestBody#required()}
* is {@code true} and there is no body content or if there is no suitable
* converter to read the content with.
*/
@Override
public Object resolveArgument(MethodParameter parameter, @Nullable ModelAndViewContainer mavContainer,
NativeWebRequest webRequest, @Nullable WebDataBinderFactory binderFactory) throws Exception {
parameter = parameter.nestedIfOptional();
//把請求數據封裝成標註的DTO對象
Object arg = readWithMessageConverters(webRequest, parameter, parameter.getNestedGenericParameterType());
String name = Conventions.getVariableNameForParameter(parameter);
if (binderFactory != null) {
WebDataBinder binder = binderFactory.createBinder(webRequest, arg, name);
if (arg != null) {
//執行數據校驗
validateIfApplicable(binder, parameter);
//如果校驗不通過,就拋出MethodArgumentNotValidException異常
//如果我們不自己捕獲,那麼最終會由DefaultHandlerExceptionResolver捕獲處理
if (binder.getBindingResult().hasErrors() && isBindExceptionRequired(binder, parameter)) {
throw new MethodArgumentNotValidException(parameter, binder.getBindingResult());
}
}
if (mavContainer != null) {
mavContainer.addAttribute(BindingResult.MODEL_KEY_PREFIX + name, binder.getBindingResult());
}
}
return adaptArgumentIfNecessary(arg, parameter);
}
}
public abstract class AbstractMessageConverterMethodArgumentResolver implements HandlerMethodArgumentResolver {
/**
* Validate the binding target if applicable.
* <p>The default implementation checks for {@code @javax.validation.Valid},
* Spring's {@link org.springframework.validation.annotation.Validated},
* and custom annotations whose name starts with "Valid".
* @param binder the DataBinder to be used
* @param parameter the method parameter descriptor
* @since 4.1.5
* @see #isBindExceptionRequired
*/
protected void validateIfApplicable(WebDataBinder binder, MethodParameter parameter) {
//獲取參數上的所有註解
Annotation[] annotations = parameter.getParameterAnnotations();
for (Annotation ann : annotations) {
//如果註解中包含了@Valid、@Validated或者是名字以Valid開頭的註解就進行參數校驗
Object[] validationHints = ValidationAnnotationUtils.determineValidationHints(ann);
if (validationHints != null) {
//實際校驗邏輯,最終會調用Hibernate Validator執行真正的校驗
//所以Spring Validation是對Hibernate Validation的二次封裝
binder.validate(validationHints);
break;
}
}
}
}
@RequestBody 參數校驗
Post、Put 請求的參數推薦使用 @RequestBody 請求體參數
對 @RequestBody 參數進行校驗需要在 DTO 對象中加入校驗條件後,再搭配 @Validated 即可完成自動校驗
如果校驗失敗,會拋出 ConstraintViolationException
異常
//DTO
@Data
public class TestDTO {
@NotBlank
private String userName;
@NotBlank
@Length(min = 6, max = 20)
private String password;
@NotNull
@Email
private String email;
}
//Controller
@RestController(value = "prettyTestController")
@RequestMapping("/pretty")
public class TestController {
private TestService testService;
@PostMapping("/test-validation")
public void testValidation(@RequestBody @Validated TestDTO testDTO) {
this.testService.save(testDTO);
}
@Autowired
public void setTestService(TestService testService) {
this.testService = testService;
}
}
校驗原理
聲明約束的方式,註解加到了參數上面,可以比較容易猜測到是使用了 AOP 對方法進行增強
而實際上 Spring 也是通過 MethodValidationPostProcessor
動態註冊 AOP 切面,然後使用 MethodValidationInterceptor
對切點方法進行織入增強
public class MethodValidationPostProcessor extends AbstractBeanFactoryAwareAdvisingPostProcessor implements InitializingBean {
//指定了創建切面的Bean的註解
private Class<? extends Annotation> validatedAnnotationType = Validated.class;
@Override
public void afterPropertiesSet() {
//爲所有@Validated標註的Bean創建切面
Pointcut pointcut = new AnnotationMatchingPointcut(this.validatedAnnotationType, true);
//創建Advisor進行增強
this.advisor = new DefaultPointcutAdvisor(pointcut, createMethodValidationAdvice(this.validator));
}
//創建Advice,本質就是一個方法攔截器
protected Advice createMethodValidationAdvice(@Nullable Validator validator) {
return (validator != null ? new MethodValidationInterceptor(validator) : new MethodValidationInterceptor());
}
}
public class MethodValidationInterceptor implements MethodInterceptor {
@Override
public Object invoke(MethodInvocation invocation) throws Throwable {
//無需增強的方法,直接跳過
if (isFactoryBeanMetadataMethod(invocation.getMethod())) {
return invocation.proceed();
}
Class<?>[] groups = determineValidationGroups(invocation);
ExecutableValidator execVal = this.validator.forExecutables();
Method methodToValidate = invocation.getMethod();
Set<ConstraintViolation<Object>> result;
try {
//方法入參校驗,最終還是委託給Hibernate Validator來校驗
//所以Spring Validation是對Hibernate Validation的二次封裝
result = execVal.validateParameters(
invocation.getThis(), methodToValidate, invocation.getArguments(), groups);
}
catch (IllegalArgumentException ex) {
...
}
//校驗不通過拋出ConstraintViolationException異常
if (!result.isEmpty()) {
throw new ConstraintViolationException(result);
}
//Controller方法調用
Object returnValue = invocation.proceed();
//下面是對返回值做校驗,流程和上面大概一樣
result = execVal.validateReturnValue(invocation.getThis(), methodToValidate, returnValue, groups);
if (!result.isEmpty()) {
throw new ConstraintViolationException(result);
}
return returnValue;
}
}
自定義校驗規則
有些時候 JSR303
標準中提供的校驗規則不滿足複雜的業務需求,也可以自定義校驗規則
自定義校驗規則需要做兩件事情
-
自定義註解類,定義錯誤信息和一些其他需要的內容
-
註解校驗器,定義判定規則
//自定義註解類
@Target({ElementType.METHOD, ElementType.FIELD, ElementType.ANNOTATION_TYPE, ElementType.CONSTRUCTOR, ElementType.PARAMETER})
@Retention(RetentionPolicy.RUNTIME)
@Documented
@Constraint(validatedBy = MobileValidator.class)
public @interface Mobile {
/**
* 是否允許爲空
*/
boolean required() default true;
/**
* 校驗不通過返回的提示信息
*/
String message() default "不是一個手機號碼格式";
/**
* Constraint要求的屬性,用於分組校驗和擴展,留空就好
*/
Class<?>[] groups() default {};
Class<? extends Payload>[] payload() default {};
}
//註解校驗器
public class MobileValidator implements ConstraintValidator<Mobile, CharSequence> {
private boolean required = false;
private final Pattern pattern = Pattern.compile("^1[34578][0-9]{9}$"); // 驗證手機號
/**
* 在驗證開始前調用註解裏的方法,從而獲取到一些註解裏的參數
*
* @param constraintAnnotation annotation instance for a given constraint declaration
*/
@Override
public void initialize(Mobile constraintAnnotation) {
this.required = constraintAnnotation.required();
}
/**
* 判斷參數是否合法
*
* @param value object to validate
* @param context context in which the constraint is evaluated
*/
@Override
public boolean isValid(CharSequence value, ConstraintValidatorContext context) {
if (this.required) {
// 驗證
return isMobile(value);
}
if (StringUtils.hasText(value)) {
// 驗證
return isMobile(value);
}
return true;
}
private boolean isMobile(final CharSequence str) {
Matcher m = pattern.matcher(str);
return m.matches();
}
}
自動校驗參數真的是一項非常必要、非常有意義的工作。JSR303
提供了豐富的參數校驗規則,再加上覆雜業務的自定義校驗規則,完全把參數校驗和業務邏輯解耦開,代碼更加簡潔,符合單一職責原則。
更多關於 Spring 參數校驗請參考:Spring Validation 最佳實踐及其實現原理,參數校驗沒那麼簡單!
自定義異常與統一攔截異常
原來的代碼中可以看到有幾個問題
-
拋出的異常不夠具體,只是簡單地把錯誤信息放到了 Exception 中
-
拋出異常後,Controller 不能具體地根據異常做出反饋
-
雖然做了參數自動校驗,但是異常返回結構和正常返回結構不一致
自定義異常是爲了後面統一攔截異常時,對業務中的異常有更加細顆粒度的區分,攔截時針對不同的異常作出不同的響應
而統一攔截異常的目的一個是爲了可以與前面定義下來的統一包裝返回結構能對應上,另一個是我們希望無論系統發生什麼異常,Http 的狀態碼都要是 200 ,儘可能由業務來區分系統的異常
//自定義異常
public class ForbiddenException extends RuntimeException {
public ForbiddenException(String message) {
super(message);
}
}
//自定義異常
public class BusinessException extends RuntimeException {
public BusinessException(String message) {
super(message);
}
}
//統一攔截異常
@RestControllerAdvice(basePackages = "com.example.demo")
public class ExceptionAdvice {
/**
* 捕獲 {@code BusinessException} 異常
*/
@ExceptionHandler({BusinessException.class})
public Result<?> handleBusinessException(BusinessException ex) {
return Result.failed(ex.getMessage());
}
/**
* 捕獲 {@code ForbiddenException} 異常
*/
@ExceptionHandler({ForbiddenException.class})
public Result<?> handleForbiddenException(ForbiddenException ex) {
return Result.failed(ResultEnum.FORBIDDEN);
}
/**
* {@code @RequestBody} 參數校驗不通過時拋出的異常處理
*/
@ExceptionHandler({MethodArgumentNotValidException.class})
public Result<?> handleMethodArgumentNotValidException(MethodArgumentNotValidException ex) {
BindingResult bindingResult = ex.getBindingResult();
StringBuilder sb = new StringBuilder("校驗失敗:");
for (FieldError fieldError : bindingResult.getFieldErrors()) {
sb.append(fieldError.getField()).append(":").append(fieldError.getDefaultMessage()).append(", ");
}
String msg = sb.toString();
if (StringUtils.hasText(msg)) {
return Result.failed(ResultEnum.VALIDATE_FAILED.getCode(), msg);
}
return Result.failed(ResultEnum.VALIDATE_FAILED);
}
/**
* {@code @PathVariable} 和 {@code @RequestParam} 參數校驗不通過時拋出的異常處理
*/
@ExceptionHandler({ConstraintViolationException.class})
public Result<?> handleConstraintViolationException(ConstraintViolationException ex) {
if (StringUtils.hasText(ex.getMessage())) {
return Result.failed(ResultEnum.VALIDATE_FAILED.getCode(), ex.getMessage());
}
return Result.failed(ResultEnum.VALIDATE_FAILED);
}
/**
* 頂級異常捕獲並統一處理,當其他異常無法處理時候選擇使用
*/
@ExceptionHandler({Exception.class})
public Result<?> handle(Exception ex) {
return Result.failed(ex.getMessage());
}
}
總結
做好了這一切改動後,可以發現 Controller 的代碼變得非常簡潔,可以很清楚地知道每一個參數、每一個 DTO 的校驗規則,可以很明確地看到每一個 Controller 方法返回的是什麼數據,也可以方便每一個異常應該如何進行反饋
這一套操作下來後,我們能更加專注於業務邏輯的開發,代碼簡潔、功能完善,何樂而不爲呢?
來源:juejin.cn/post/7123091045071454238
本文由 Readfog 進行 AMP 轉碼,版權歸原作者所有。
來源:https://mp.weixin.qq.com/s/K5YGdEomTe-X92l15Hv-0A